Call 08048986924 72% Response Rate

our range

Industrial Chillers

Pioneers in the industry, we offer sonitech scroll chillers, chilling plant, air cooled chillers, screw chiller and reciprocating chillers from India.
Sonitech Scroll Chillers

Sonitech Scroll Chillers

Rs 1.55 Lakh  / UnitGet Best Price
Tonnage5 TR & Above
BrandSonitech
Compressor TypeScroll
Cooling Capacity15000 KCal/Hr
Phase3 Phase
MaterialMild Steel
Automation GradeAutomatic
Voltage440 V
No. Of Compressor1
Refrigerant UsedR-22
Usage/ApplicationIndustrial
Country of OriginMade in India

• High-performance compressor manufactured by the world leaders like Danfoss/Emerson to ensure that the chiller is economical and durable with low vibration and low noise.

• Highly integrated motherboard is adopted and hence the function is strong and reliable.

• High level control algorithm is installed to control chiller properly to avoid unnecessary stoppage protection.

• We have set complete safety protection checks in place in order to make chiller safely and reliably run.

• Proper selection of excellent raw materials and fittings results in guaranteeing the perfect chiller quality.

View Complete details

get quote request a call back
Chilling Plant

Chilling Plant

Rs 2 Lakh  / UnitGet Best Price
BrandSonitech
Compressor TypeScroll
Phase3 Phase
Automation GradeAutomatic
Voltage440 V
Refrigerant UsedR-22
Usage/ApplicationIndustrial
Country of OriginMade in India
Frequency50 Hz
Capacity2.5 ton
Body MaterialMild Steel

Sonitech India Cooling Towers (bottle shape design, FRP induced) are known for superior design and technology. Our Cooling Tower has been designed to meet the high standards demanded by engineers, who require a compact, heavy duty and efficient cooling tower with a long service life and an aesthetic design. Proven in many industries for over 2 decades, these towers have an advantage of compactness and are extensively used in many industries and in HVAC applications.

Being round, the air flow through the Draught Cooling tower is more evenly distributed. Structural members do not interrupt air intake and therefore they have been proven to be thermo- dynamically the most efficient design in the field. This translated directly into reducing running costs. The tower offers PVC fills and eliminators in a design that maximizes economy and efficiency. The counter flow design facilitates low pump heads. The water is distributed inside the tower over the fill area through the self rotating sprinkler so as to give an even distribution over the complete fill area.

DESIGN

FRP Cooling Towers are of vertical induced draught counter flow design with uniform water distribution and optimal heat transfer. Cooling towers can be installed independent of wind velocity

AXIAL FAN

Especially designed energy efficient fans are induced draught axial type with adjustable pitch. Fan blades pitch is factory set and dynamically balanced.

CASING

The tower is made of tough fiberglass reinforced plastic (FRP induced cooling towers) and has sufficient structural strength to withstand high wind velocity and vibrations. Gel coat is used for UV rays protection and longer life. The water sump is also of FRP and is leak proof.

FILL

 

The fill is of rigid poly vinyl chloride (PVC) and is of honey come design with very large contact surface area. The purpose of fill is to split the water and air into several streams to increase the time of contact and also heat transfer between air and water. The fills are available with standard size of 24” x 12” x 6” with the thickness of 0.25 mm.

MOTORS

The motors are totally enclosed (IP-55) flange type, 415 V, 50Hz., induction weather proof with extended shaft and are especially designed for cooling towers.

DRIFT ELIMINATORThe FRP (induced) eliminator attached to the sprinkler reduces the drift loss of water and it is made of rigid PVC material.

SPRINKLER

Sprinklers are available in Brass/ SS/ Alimunium / PVC and the sprinkler pipe distributes the hot water over the entire space of the fill area. Sprinkler pipes are non- clogging and require low pressure to operate and assures uniform water flow.

 

View Complete details

get quote request a call back
Air Cooled Chillers

Air Cooled Chillers

Rs 1.5 Lakh  / UnitGet Best Price
PhaseThree Phase
Voltage440 V
BrandSonitech
Power1.5 HP
MaterialMild Steel
Automation GradeAutomatic
Usage/ApplicationIndustrial
Capacity2 Ton
Country of OriginMade in India

Sonitech India Cooling Towers (bottle shape design, FRP induced) are known for superior design and technology. Our Cooling Tower has been designed to meet the high standards demanded by engineers, who require a compact, heavy duty and efficient cooling tower with a long service life and an aesthetic design. Proven in many industries for over 2 decades, these towers have an advantage of compactness and are extensively used in many industries and in HVAC applications.

Being round, the air flow through the Draught Cooling tower is more evenly distributed. Structural members do not interrupt air intake and therefore they have been proven to be thermo- dynamically the most efficient design in the field. This translated directly into reducing running costs. The tower offers PVC fills and eliminators in a design that maximizes economy and efficiency. The counter flow design facilitates low pump heads. The water is distributed inside the tower over the fill area through the self rotating sprinkler so as to give an even distribution over the complete fill area.

DESIGN

FRP Cooling Towers are of vertical induced draught counter flow design with uniform water distribution and optimal heat transfer. Cooling towers can be installed independent of wind velocity

AXIAL FAN

Especially designed energy efficient fans are induced draught axial type with adjustable pitch. Fan blades pitch is factory set and dynamically balanced.

CASING

The tower is made of tough fiberglass reinforced plastic (FRP induced cooling towers) and has sufficient structural strength to withstand high wind velocity and vibrations. Gel coat is used for UV rays protection and longer life. The water sump is also of FRP and is leak proof.

FILL

 

The fill is of rigid poly vinyl chloride (PVC) and is of honey come design with very large contact surface area. The purpose of fill is to split the water and air into several streams to increase the time of contact and also heat transfer between air and water. The fills are available with standard size of 24” x 12” x 6” with the thickness of 0.25 mm.

MOTORS

The motors are totally enclosed (IP-55) flange type, 415 V, 50Hz., induction weather proof with extended shaft and are especially designed for cooling towers.

DRIFT ELIMINATORThe FRP (induced) eliminator attached to the sprinkler reduces the drift loss of water and it is made of rigid PVC material.

SPRINKLER

Sprinklers are available in Brass/ SS/ Alimunium / PVC and the sprinkler pipe distributes the hot water over the entire space of the fill area. Sprinkler pipes are non- clogging and require low pressure to operate and assures uniform water flow.

 

View Complete details

get quote request a call back
Screw Chiller

Screw Chiller

Rs 8 Lakh  / UnitGet Best Price
BrandSonitech
Power4 HP
Phase3 Phase
Automation GradeAutomatic
Voltage380 V
Refrigerant UsedR134a
Usage/ApplicationIndustrial
Country of OriginMade in India
Frequency50 Hz
Body MaterialMild Steel
Capacity3 ton

Sonitech India Cooling Towers (bottle shape design, FRP induced) are known for superior design and technology. Our Cooling Tower has been designed to meet the high standards demanded by engineers, who require a compact, heavy duty and efficient cooling tower with a long service life and an aesthetic design. Proven in many industries for over 2 decades, these towers have an advantage of compactness and are extensively used in many industries and in HVAC applications.

Being round, the air flow through the Draught Cooling tower is more evenly distributed. Structural members do not interrupt air intake and therefore they have been proven to be thermo- dynamically the most efficient design in the field. This translated directly into reducing running costs. The tower offers PVC fills and eliminators in a design that maximizes economy and efficiency. The counter flow design facilitates low pump heads. The water is distributed inside the tower over the fill area through the self rotating sprinkler so as to give an even distribution over the complete fill area.

DESIGN

FRP Cooling Towers are of vertical induced draught counter flow design with uniform water distribution and optimal heat transfer. Cooling towers can be installed independent of wind velocity

AXIAL FAN

Especially designed energy efficient fans are induced draught axial type with adjustable pitch. Fan blades pitch is factory set and dynamically balanced.

CASING

The tower is made of tough fiberglass reinforced plastic (FRP induced cooling towers) and has sufficient structural strength to withstand high wind velocity and vibrations. Gel coat is used for UV rays protection and longer life. The water sump is also of FRP and is leak proof.

FILL

 

The fill is of rigid poly vinyl chloride (PVC) and is of honey come design with very large contact surface area. The purpose of fill is to split the water and air into several streams to increase the time of contact and also heat transfer between air and water. The fills are available with standard size of 24” x 12” x 6” with the thickness of 0.25 mm.

MOTORS

The motors are totally enclosed (IP-55) flange type, 415 V, 50Hz., induction weather proof with extended shaft and are especially designed for cooling towers.

DRIFT ELIMINATORThe FRP (induced) eliminator attached to the sprinkler reduces the drift loss of water and it is made of rigid PVC material.

SPRINKLER

Sprinklers are available in Brass/ SS/ Alimunium / PVC and the sprinkler pipe distributes the hot water over the entire space of the fill area. Sprinkler pipes are non- clogging and require low pressure to operate and assures uniform water flow.

 

View Complete details

get quote request a call back
  • Reciprocating Chillers
  • Reciprocating Chillers
Reciprocating Chillers

Reciprocating Chillers

Rs 5 Lakh  / UnitGet Best Price
Capacity2 ton
BrandSonitech
TypeWater-Cooled
Automatic GradeAutomatic
PhaseThree Phase
Power3 HP
Voltage410 V
Body MaterialMild Steel
CompressorSealed
Warranty12 months
Refrigerant UsedR134a
Usage/ApplicationIndustrial
Country of OriginMade in India
Frequency50 Hz

Sonitech India Cooling Towers (bottle shape design, FRP induced) are known for superior design and technology. Our Cooling Tower has been designed to meet the high standards demanded by engineers, who require a compact, heavy duty and efficient cooling tower with a long service life and an aesthetic design. Proven in many industries for over 2 decades, these towers have an advantage of compactness and are extensively used in many industries and in HVAC applications.

Being round, the air flow through the Draught Cooling tower is more evenly distributed. Structural members do not interrupt air intake and therefore they have been proven to be thermo- dynamically the most efficient design in the field. This translated directly into reducing running costs. The tower offers PVC fills and eliminators in a design that maximizes economy and efficiency. The counter flow design facilitates low pump heads. The water is distributed inside the tower over the fill area through the self rotating sprinkler so as to give an even distribution over the complete fill area.

DESIGN

FRP Cooling Towers are of vertical induced draught counter flow design with uniform water distribution and optimal heat transfer. Cooling towers can be installed independent of wind velocity

AXIAL FAN

Especially designed energy efficient fans are induced draught axial type with adjustable pitch. Fan blades pitch is factory set and dynamically balanced.

CASING

The tower is made of tough fiberglass reinforced plastic (FRP induced cooling towers) and has sufficient structural strength to withstand high wind velocity and vibrations. Gel coat is used for UV rays protection and longer life. The water sump is also of FRP and is leak proof.

FILL

 

The fill is of rigid poly vinyl chloride (PVC) and is of honey come design with very large contact surface area. The purpose of fill is to split the water and air into several streams to increase the time of contact and also heat transfer between air and water. The fills are available with standard size of 24” x 12” x 6” with the thickness of 0.25 mm.

MOTORS

The motors are totally enclosed (IP-55) flange type, 415 V, 50Hz., induction weather proof with extended shaft and are especially designed for cooling towers.

DRIFT ELIMINATORThe FRP (induced) eliminator attached to the sprinkler reduces the drift loss of water and it is made of rigid PVC material.

SPRINKLER

Sprinklers are available in Brass/ SS/ Alimunium / PVC and the sprinkler pipe distributes the hot water over the entire space of the fill area. Sprinkler pipes are non- clogging and require low pressure to operate and assures uniform water flow.

 

View Complete details

get quote request a call back

EXPLORE MORE CATEGORIES