Call 08048986924 76% Response Rate

our range

Air Dryers

Our range of products include compressed air dryer, refrigerated air dryers, desiccant air dryers, heatless air dryer, moisture separators and filter drier.
  • Compressed Air Dryer
  • Compressed Air Dryer
Compressed Air Dryer

Compressed Air Dryer

Rs 40  / UnitGet Best Price

Product Brochure

Usage/ApplicationIndustrial
BrandSonitech
Minimum Output Dew Point40 Degree C
Warranty12 months
Frequency50 Hz
PhaseThree Phase
MaterialMS
Automation GradeAutomatic
Power SourceElectric
Voltage220 V
Capacity200 CFM
Country of OriginMade in India

Sonitech India Cooling Towers (bottle shape design, FRP induced) are known for superior design and technology. Our Cooling Tower has been designed to meet the high standards demanded by engineers, who require a compact, heavy duty and efficient cooling tower with a long service life and an aesthetic design. Proven in many industries for over 2 decades, these towers have an advantage of compactness and are extensively used in many industries and in HVAC applications.

Being round, the air flow through the Draught Cooling tower is more evenly distributed. Structural members do not interrupt air intake and therefore they have been proven to be thermo- dynamically the most efficient design in the field. This translated directly into reducing running costs. The tower offers PVC fills and eliminators in a design that maximizes economy and efficiency. The counter flow design facilitates low pump heads. The water is distributed inside the tower over the fill area through the self rotating sprinkler so as to give an even distribution over the complete fill area.

DESIGN

FRP Cooling Towers are of vertical induced draught counter flow design with uniform water distribution and optimal heat transfer. Cooling towers can be installed independent of wind velocity

AXIAL FAN

Especially designed energy efficient fans are induced draught axial type with adjustable pitch. Fan blades pitch is factory set and dynamically balanced.

CASING

The tower is made of tough fiberglass reinforced plastic (FRP induced cooling towers) and has sufficient structural strength to withstand high wind velocity and vibrations. Gel coat is used for UV rays protection and longer life. The water sump is also of FRP and is leak proof.

FILL

 

The fill is of rigid poly vinyl chloride (PVC) and is of honey come design with very large contact surface area. The purpose of fill is to split the water and air into several streams to increase the time of contact and also heat transfer between air and water. The fills are available with standard size of 24” x 12” x 6” with the thickness of 0.25 mm.

MOTORS

The motors are totally enclosed (IP-55) flange type, 415 V, 50Hz., induction weather proof with extended shaft and are especially designed for cooling towers.

DRIFT ELIMINATORThe FRP (induced) eliminator attached to the sprinkler reduces the drift loss of water and it is made of rigid PVC material.

SPRINKLER

Sprinklers are available in Brass/ SS/ Alimunium / PVC and the sprinkler pipe distributes the hot water over the entire space of the fill area. Sprinkler pipes are non- clogging and require low pressure to operate and assures uniform water flow.

 

View Complete details

get quote request a call back
Refrigerated Air Dryers

Refrigerated Air Dryers

Rs 35  / UnitGet Best Price

Product Brochure

Usage/ApplicationIndustrial
BrandSonitech
MaterialMild Steel
Automation GradeAutomatic
Voltage440 V
Dryer TypeRefrigeration Dryer
Capacity160 CFM
Warranty12 months
PhaseThree Phase
Frequency50 Hz
Country of OriginMade in India

Sonitech India Cooling Towers (bottle shape design, FRP induced) are known for superior design and technology. Our Cooling Tower has been designed to meet the high standards demanded by engineers, who require a compact, heavy duty and efficient cooling tower with a long service life and an aesthetic design. Proven in many industries for over 2 decades, these towers have an advantage of compactness and are extensively used in many industries and in HVAC applications.

Being round, the air flow through the Draught Cooling tower is more evenly distributed. Structural members do not interrupt air intake and therefore they have been proven to be thermo- dynamically the most efficient design in the field. This translated directly into reducing running costs. The tower offers PVC fills and eliminators in a design that maximizes economy and efficiency. The counter flow design facilitates low pump heads. The water is distributed inside the tower over the fill area through the self rotating sprinkler so as to give an even distribution over the complete fill area.

DESIGN

FRP Cooling Towers are of vertical induced draught counter flow design with uniform water distribution and optimal heat transfer. Cooling towers can be installed independent of wind velocity

AXIAL FAN

Especially designed energy efficient fans are induced draught axial type with adjustable pitch. Fan blades pitch is factory set and dynamically balanced.

CASING

The tower is made of tough fiberglass reinforced plastic (FRP induced cooling towers) and has sufficient structural strength to withstand high wind velocity and vibrations. Gel coat is used for UV rays protection and longer life. The water sump is also of FRP and is leak proof.

FILL

 

The fill is of rigid poly vinyl chloride (PVC) and is of honey come design with very large contact surface area. The purpose of fill is to split the water and air into several streams to increase the time of contact and also heat transfer between air and water. The fills are available with standard size of 24” x 12” x 6” with the thickness of 0.25 mm.

MOTORS

The motors are totally enclosed (IP-55) flange type, 415 V, 50Hz., induction weather proof with extended shaft and are especially designed for cooling towers.

DRIFT ELIMINATORThe FRP (induced) eliminator attached to the sprinkler reduces the drift loss of water and it is made of rigid PVC material.

SPRINKLER

Sprinklers are available in Brass/ SS/ Alimunium / PVC and the sprinkler pipe distributes the hot water over the entire space of the fill area. Sprinkler pipes are non- clogging and require low pressure to operate and assures uniform water flow.

 

View Complete details

get quote request a call back
Desiccant Air Dryers

Desiccant Air Dryers

Rs 30  / UnitGet Best Price

Product Brochure

Automation GradeAutomatic
Capacity150 CFM
Voltage220 V
Minimum Output Dew Point40 Degree C
BrandSonitech
MaterialMS
Usage/ApplicationIndustrial
PhaseThree Phase
Frequency50 Hz
Power SourceElectric
Country of OriginMade in India

Sonitech India Cooling Towers (bottle shape design, FRP induced) are known for superior design and technology. Our Cooling Tower has been designed to meet the high standards demanded by engineers, who require a compact, heavy duty and efficient cooling tower with a long service life and an aesthetic design. Proven in many industries for over 2 decades, these towers have an advantage of compactness and are extensively used in many industries and in HVAC applications.

Being round, the air flow through the Draught Cooling tower is more evenly distributed. Structural members do not interrupt air intake and therefore they have been proven to be thermo- dynamically the most efficient design in the field. This translated directly into reducing running costs. The tower offers PVC fills and eliminators in a design that maximizes economy and efficiency. The counter flow design facilitates low pump heads. The water is distributed inside the tower over the fill area through the self rotating sprinkler so as to give an even distribution over the complete fill area.

DESIGN

FRP Cooling Towers are of vertical induced draught counter flow design with uniform water distribution and optimal heat transfer. Cooling towers can be installed independent of wind velocity

AXIAL FAN

Especially designed energy efficient fans are induced draught axial type with adjustable pitch. Fan blades pitch is factory set and dynamically balanced.

CASING

The tower is made of tough fiberglass reinforced plastic (FRP induced cooling towers) and has sufficient structural strength to withstand high wind velocity and vibrations. Gel coat is used for UV rays protection and longer life. The water sump is also of FRP and is leak proof.

FILL

 

The fill is of rigid poly vinyl chloride (PVC) and is of honey come design with very large contact surface area. The purpose of fill is to split the water and air into several streams to increase the time of contact and also heat transfer between air and water. The fills are available with standard size of 24” x 12” x 6” with the thickness of 0.25 mm.

MOTORS

The motors are totally enclosed (IP-55) flange type, 415 V, 50Hz., induction weather proof with extended shaft and are especially designed for cooling towers.

DRIFT ELIMINATORThe FRP (induced) eliminator attached to the sprinkler reduces the drift loss of water and it is made of rigid PVC material.

SPRINKLER

Sprinklers are available in Brass/ SS/ Alimunium / PVC and the sprinkler pipe distributes the hot water over the entire space of the fill area. Sprinkler pipes are non- clogging and require low pressure to operate and assures uniform water flow.

 

View Complete details

get quote request a call back
Refrigerated Air Dryers

Refrigerated Air Dryers

Rs 35  / UnitGet Best Price

Minimum Order Quantity: 1 Unit

Product Brochure

Automation GradeAutomatic
Dryer TechnologyRefrigerated
Dryer TypeRefrigeration Dryer
Maximum Pressure14 bar, >14 bar, 7 bar, 4 bar, 12 bar, 10 bar, 8 bar, <2 bar
Capacity20 CFM to 5000 CFM
Drying Capacity51 - 120 cfm, 0-20 cfm, 501 - 1000 cfm, 121 - 500 cfm, 21 - 50 cfm
Dryer BrandSONITECH
Minimum Output Dew Point-20 C
Warranty12 months
RefrigerantR22/ R407C/R134a
ISO Class90012015
BrandSONITECH
ConditionNew
Installation/After Sales Service AvailableYes

We are identified as one of the most reputed Refrigerated Compressed Air Dryer manufacturers. We provide Refrigerated Air Dryers Using Freon Gas. The superior Refrigerated Air Dryer System provided by us is extremely effective to purify impure compressed air that contains dust, oil, and moisture.


AIR Drying:
These are two basic modes of removal of moisture (drying of air) from compressed air:
  • Adsorption drying.
  • Refrigeration drying.

Adsorption Drying:
  • It works on basic principle of mass transfer i.e. adsorption of moisture from compressed air by desiccant like Silica Gel, Activated Alumina or Molecular Sieves. These types of air dryers are economical when extremely dry air having atmospheric dew point of -40oC or lower is required.

Refrigeration Drying:

  • It works on the principle of cooling down air to 3oC by a suitable refrigerant like freon, NH3 Etc. Refrigerated dryers are the best choice for instrument-air applications. We are expertise in design and manufacture of both the above types of air dryer and depending upon the ultimate use, we can offer suitable dryer, duly selected and designed to meet your specific need.

 

Specifications:

Model Rated Capacity in CFM
Standard refrigerant HP Air Inlet/Outlet Connection Approx. Dimensions in mm Approx. weight in kgs
RAD-1-A 10 0.16 15 BSP 600 X 400X 400 50
RAD-2-A 20 0.25 15 BSP 750 X 500 X 600 60
RAD-5-A 50 0.33 20 BSP 900 X 500 X 600 70
RAD-10-W 100 0.75 25 BSP 1100 X 500 X 600 100

View Complete details

get quote request a call back
Heatless Air Dryer

Heatless Air Dryer

Rs 37  / UnitGet Best Price

Product Brochure

Usage/ApplicationIndustrial
Automation GradeAutomatic
BrandSonitech
Minimum Output Dew Point40 Degree C
Capacity170 CFM
Warranty12 months
Frequency50 Hz
PhaseThree Phase
MaterialMS
ColorBlue
Dimension800 x 400 x 1376 mm
Voltage220 V
Country of OriginMade in India
We are the manufacturer of Heatless Air Dryer. Also called as the desiccant dryer, compressed air passing through towers filled with desiccant like alumina, silica gel. This material attracts water molecules and dry air (moisture free) air comes out as the product. it is a device which removes the water contains from compressed air. These compressed air dryers are widely found in commercial as well as industrial applications. Water vapors in the compressed air can be the cause of operational problems like freezing of outdoor air lines, corrosion in pipe lines, industrial equipment, malfunctioning of pneumatic process control instruments and many more air dryers playing a vital role in that case.


View Complete details

get quote request a call back
  • Moisture   Separators
  • Moisture   Separators
  • Moisture   Separators
Moisture   Separators

Moisture Separators

Rs 10  / unitGet Best Price
MaterialAluminium
Temperature1000*1000
I Deal InNew and Second Hand
Country of OriginMade in India
Industrial and medical oxygen gas plant manufacturer in India.
We are manufacturer of fully automatic industrial and medical oxygen gas plant for on-line process and cylinder refilling unit.
we manufacture PSA Oxygen gas plant as per the need of the client, as per the required capacity and required purity.

View Complete details

get quote request a call back

Filter Drier

Price on Request
get quote request a call back

EXPLORE MORE CATEGORIES